01Roof Cleaning
Moss, lichen and algae taken off tile, slate and concrete roofs using the method that suits the covering, never a single blunt approach.
- Soft wash and biocide treatment
- Manual moss removal
- Clay, concrete and slate tiles
Service 02 of 07
Block paving, resin, tarmac, concrete and gravel drives brought back, with sand replacement and sealing where the surface calls for it.
A driveway is the first thing anyone sees. Weeds through the joints, black spotting on the blocks and a green film across the shaded side make an otherwise smart house look neglected. We clean block paving, resin bound, imprinted concrete, tarmac and natural stone drives, and we match the method to the surface rather than pointing a turbo nozzle at everything and hoping.
Rotary surface cleaning lifts the dirt without carving lines into the blocks, then we remove the loosened weed growth, treat the joints and refill with kiln dried sand. Skipping the sand is the most common shortcut in this trade and it is why some drives look worse six months after a clean than they did before. The sand is what holds the blocks in place and keeps water out of the sub base.
Resin bound surfaces need far lower pressure than block paving or the stone starts to release from the binder. Tarmac is softer again. Imprinted concrete usually needs the old sealer stripped before it will take a new coat properly. Each of these is a different job with different kit, and we quote them as such.
Sealing is optional and we will tell you honestly whether it is worth it on your surface. On block paving it stabilises the sand, resists oil staining and slows weed return. On a drive that is already breaking up it is money spent papering over a problem, and we will say so.
We carry out driveway cleaning throughout Beaconsfield, Gerrards Cross, Northwood, Chorleywood, Rickmansworth, Pinner, Ruislip, Amersham, The Chalfonts, Windsor, Ascot, Sunningdale and everywhere else within roughly 15 miles of Beaconsfield. If your town is not listed, ring us and we will tell you straight away whether we cover you.
Yes, kiln dried sand replacement is part of every block paving clean. Cleaning a drive and leaving the joints empty destabilises the blocks and lets weeds back in almost immediately.
Usually a good deal of it. Fresh oil lifts well with a degreaser and hot water. Old stains that have soaked deep into porous concrete or block will fade rather than vanish, and we will tell you which of the two you have when we quote.
Straight away after a standard clean. If we seal the drive, keep vehicles off for 24 hours and avoid turning the wheels while stationary for the first week.
Not at the pressure we use. Resin needs a much gentler approach than block paving, and damage on resin drives is nearly always caused by someone using a turbo nozzle at close range.
Also worth doing
Cleaning the roof and leaving the drive and gutters is a false economy, because the run off from one lands on the other. Combined jobs are quoted as one visit.
01Moss, lichen and algae taken off tile, slate and concrete roofs using the method that suits the covering, never a single blunt approach.
02Indian sandstone, porcelain, limestone, slabs and decking cleaned at the right pressure, with jointing repointed where it has failed.
03K Rend, silicone, monocouche, pebbledash and painted render cleaned by soft washing, never by pressure that cracks the surface.
Book a survey
Tell us the postcode and what needs cleaning. We will fly the property, show you exactly what we can see, and come back to you today with a fixed price.
Essential cookies keep this site working and are always on. We will only load anything else, such as analytics, if you accept. Nothing non essential runs until you choose. Read our cookie policy.